4 Methods To Turn On Smartwatch Without Power Button Easily

If you wouldn’t care your smartwatch as much as it needed, it would be damaged and causing errors. One of the most common issue that almost every smartwatch user face is power button being damaged. This issue often happen if you don’t pay your attention for your watch or if your smartwatch remains dead for a long time.

If your Smartwatch’s power button don’t work, you might think that is the end of your phone. But that’s not true. If you know how to turn on smartwatch without power button, you can use your watch more long period. In this tutorial we are going to talk about some methods to turn on smartwatch without power button.

Reasons for smartwatch power button is not working

There are many reasons for your smartwatch power button is not working. Some of them are given below.

• The most common reason for the smartwatch power button is not working is leave your watch uncharged for a long period. Your careless attitude can lead your smartwatch to the failure of the power button.
• If the power button loses its strength and efficiency, it can be caused for power button is not working. This issue mostly happens with low quality watches. It does not mean that high quality brand watches doesn’t face that issue. They also have it. But not as much as low quality watches.
• If you keep pressing the power button unnecessarily and randomly, it can be caused also.
• The power button might be permanently damaged by an accidental moment of carelessness.
• We mentioned above that pressing power button more than often can lead to power button stop working. Some people press the power button again and again without any reason.
• If dust or any hard liquid gets stuck in the power button, it can lead failure in the power button also.

Solutions for turning on the watch without power button

If your watch power button stops working, follow below steps to turn on smartwatch without power button.

1. Check The Guide Book

Every smartwatch comes with a guide book. If you got any issue with your watch, the first thing you need to do is check the guide book. The guide book provides solutions for many specific problems. There is a chance to find a solution for turn on smartwatch without power button. Companies and brands have mentioned many solutions to fix different issues in their guidebook.

2. Charge Your Watch

The next thing you need to do for turn on smartwatch without power button is charging the watch. You need to use the wireless charger you received with the watch to charge your watch. You can not use any alternative for it. If you connect your charger correctly, your watch will turn on after some time of charging. You don’t need to press the power button to turn it on in this method. It will take some time, but this is the most reliable method to turn on smartwatch without power button.

3. Solve These Common Issues

If your watch won’t turn on, the reason might be the dead battery. Therefore you need to check your watch by charging also. If you use a faulty charger, watch won’t be charged either. Therefore make sure to use a charger with a good condition. If the socket that you are using is faulty, your watch won’t be charged. You can use a different charger or socket to check whether your watch is charging or not. Your watch power button may be working correctly and charger or socket can be faulty.

4. Go In-Depth

If above methods didn’t work, you can use go in-depth to turn on smartwatch without power button. This method is little bit difficult than above methods. If a layer of carbon is seen in the copper plate of the watch, above charging methods wouldn’t work. If this happens, the connector of the charger cannot connect with the charging pin of the watch. If yes, you need to remove the carbon layer firstly.

Follow below steps to do it.

Step 1: Material Picking

To follow tis steps, you need to collect below materials at first.

1. Water
2. A little jar
3. Cotton bud / Toothpick and Cotton
4. The charger of the smartwatch

You only need to get one of from cotton bud, or cotton and toothpick. Not all of them. Pick the one that you can find easily.

Step 2: Put Cotton In Water

After collecting above materials, pour a small amount of water into the small jar. Then dip the cotton bud into the jar. If you wouldn’t be able to find a cotton bud, use a toothpick and some cotton and make a cotton and use it instead. Then dip it into the jar.

Step 3: Rub The Copper Plate

Remove the cotton bud that you dug into the jar. Then rub the copper plates of the connector, that are made of charging pins. You should rub the connector for two to three minutes. But be careful not to damaged or scratch the screen. You need to rub it gentle, effectively and powerful. Don’t use too much water or don’t rub it too hard.

Step 4: Dry The Plate

After rubbing the copper plate, next thing you need to do is, wipe down  it and make it dry. Follow below steps to do so.

1. Make sure that the cotton is dry before using it.
2. Wipe the copper plate properly and remove any extra moisture from it.
3. It will take some tome and just wait for it.

After the copper plate is dry, you can use it.

Step 5: Use The Same Process With The Charger

You need to do all above steps, with your charger. Firstly, dip the cotton bud into the jar and rub the charger. You need to firstly rub charger pins that connect the watch to the charger. Rub it gently and effectively. Then dry it. Make sure not to damaged the charger pins. Let it dry for a couple of minutes. Now you can use it.

Step 6: Connect The Watch To The Charger

After cleaning and drying the pins of the the charger and watch, connect them correctly. Then let it to be charged. If you followed all above steps correctly, when it starts to charge your watch will be connected to the charger and it will be turned on. 

Step 7: Repeat This Method

 If you have not connected the watch to the charger, ten do above process again again. Do it at least two or three times. After trying several times, you will be succeed. You will be able to turn on smartwatch without power button.

If your watch power button won’t work, then follow above four methods and you will be able to turn on smartwatch without power button. First three methods are easy to use. If they didn’t work, do the last method and although it was difficult, it will be success for sure and you will be able to turn on smartwatch without power button.

Related Posts:

• How To Fix Samsung Galaxy Watch When Its Not Turning On
• How to Troubleshoot Smartwatch Problems
• Smartwatch Problems and Fixes
• How To Charge Michael Kors Smartwatch Without a Charger

Frequently Asked Questions

How do I turn on my completely dead Apple Watch?

To turn on Apple Watch, press and hold the Digital Crown and the Side button for 10-15 seconds. The Apple logo will appear on your Apple Watch screen. Then release both buttons. Your Apple Watch will be turned back on. It will take some time. Sometimes, you might have to press and hold both buttons for more than 20 seconds to turn your watch on.

How do I know if my smart watch is charging?

When your watch is charging, a lightning bolt will be visible on the watch’s screen. A lightning bolt will also appear next to your battery percentage. You can also swipe down to see it. And also a circle indicator will show on the screen. It will show the percentage of charge.

How long do smartwatches battery last?

Most smartwatches have designed to last for at least a day. Which means you can use it 12-48 hours. Some smartwatches offer longer battery lives. It depend on your smartwatches brand.