Fix Windows 11 Stuck on Preparing Windows Loop?

Reviewed By Expert : Jane Madison

0
fix windows 11 stuck on preparing windows loop

fix windows 11 stuck on preparing windows loop

Have you met problems when updating your operating system like getting stuck in the preparing windows screen? Here are some ways for fix windows 11 stuck on preparing windows loop.

Sometimes windows gets stuck specially doing critical operations like installing security updates. Windows 11 gets stuck mostly preparing windows loops. If you get stuck on your windows, it it will prevent from starting Windows.

When the size of the update getting bigger There is a chance to stuck your windows. And also it can be happened when some important system files are missing. Ig you have to face such a situation here are some methods you can use.

1. Restart your PC

If you have more complicated methods for use, this is the first thing you should do for fix windows 11 stuck on preparing windows loop. It can make the stuck problem but sometimes it wouldn’t be useful. You can restart your PC if you can access the basic windows features.

Windows frequently crashes while performing a certain operation due to a temporary system corruption error. If the error is not fatal, a restarting can fix it. Using steps that given below, you can restart your PC.

1.On the Windows menu, click the Power icon.

2.Next choose Restart from the context menu

fix windows 11 stuck on preparing windows loop

This is the basic restart method. If this method wouldn’t work you have to go for a hard reset. If the system gets stuck in the Preparing Windows Setup loop when trying to shut down the system you can fix it using basic system reset.

Hard reset method will cut power to the device. Therefore its better to use its if you are already experienced with it. Following below steps you can do a hard reset.

  1. Firstly press and hold the power button until the computer shuts down.
  2. Unplug all peripherals from your computer and unplug them from their power source. If it has a battery please remove it.
  3. It will take a few minutes for the PC to cool down so wait until then.
  4. Reconnect your computer to power again. If you have removed the battery, reinsert it. Next turn on your device.
  5. Install all available pending updates after reboot. Then restart your PC again.

Using hard reset you would be able to fix windows 11 stuck on preparing windows loop.

2. Troubleshooting in repair mode

If the above basic reset and hard reset both didn’t work you have to go for a some complicated method for fix windows 11 stuck on preparing windows loop. Firstly you need to identify the source of the problem and then you can fix it.

Firstly need to boot into repair mode and then you can try different troubleshooting method. To find best method follow all the methods one by one and one will work for you and you would be able to fix windows 11 stuck on preparing windows loop.

Booting into Repair Mode

You can using keyboard shortcut boot into repair mode easily. For it press the F11 key, on the configuration screen until Windows displays an advanced setup screen. If that doesn’t work for you, shut down your PC using the power button on the setup screen.

If this step didn’t work, next shut down your PC still you are on the configuration screen. Do it twice, and on the third reboot, Windows will automatically launch the repair mode. IN here there will be the advanced startup menu.

If this method fails there is an only way to boot into repair mode. It is is create an installation media on another PC. This step same in Windows 10 and Windows 11.

When create an installation media on another PC You need to make sure you install it directly to a USB drive or a disk. After the creating installation media on another PC insert it into your computer. Then power on your PC while pressing the corresponding BIOS boot menu key.

Run system scans

After booting into the repair mode, now you can start performing troubleshooting methods. The first troubleshooting method is to run the SFC, DISM, and CHKDSK utilities from the command prompt. These utilities. If your system is having with such errors, the tools identify them and fix the problem by replacing faulty system files.

You can continue the process by following below steps.

1.In the repair mode, go to Troubleshoot > Advanced Options.

fix windows 11 stuck on preparing windows loop

2.Select Command Prompt.

fix windows 11 stuck on preparing windows loop

3. Type BCDEDIT and press Enter in the following window.

fix windows 11 stuck on preparing windows loop

4.Find the drive where Windows is installed. This is usually drive C, but this may not be the same for everyone.

5.Then run the following command. Replace < Windows_drive_letter> with the letter of the drive that contains Windows.

sfc /scannow /offbootdir=<Windows_Drive_Letter>:\ /offwindir=<Windows_Drive_Letter>:\windows                     
fix windows 11 stuck on preparing windows loop

6.After running the command, run the following commands

DISM /Online /Cleanup-Image /StartComponentCleanup

start component store

DISM /Online /Cleanup-Image /AnalyzeComponentStore

Analyze component store

7. Next execute this command

DISM /Online /Cleanup-Image /RestoreHealth /source:F:\Sources\Install.wim:1 /LimitAccess

restore health

8.Execute following command and run Check disk utility. Make sure to enter the your relavent drive letter in the [driveletter] place.

chkdsk [driveletter] /f /r /x

Check disk

Now you need to restart your PC and you can check whether above commands made different or not.

Launch the safe mode

Safe mode with networking starts your system with only the drivers and programs it needs to run. It is basically a diagnostic mode which helps you identify the cause of an error. After it will fix the problem.

Following these steps, you can boot into the safe mode.

1.Launch the repair mode and go to Troubleshoot > Advanced Options > Startup Settings.

2.In the window that opens, click the Restart button.

Startup Settings.

3.Press F5 on your keyboard to boot into the safe mode.

Safe mode with networking

4.Once you are in Safe Mode, go to the Start menu.

5.Select Shut down or sign out > Restart.

Now you can check if your system launch having any errors after reboot. You can also add a safe mode shortcut to the Windows 11 Start menu. If something like this happens again in the future you can faster it.

Uninstalling Updates

Corrupted or faulty updates can be caused for windows 11 stuck on preparing windows loop. If the problem started after updating your system, you can uninstall the updates. There are the steps of uninstalling your update.

1.In repair mode, go to Troubleshoot > Advanced > Uninstall updates.

2.In the next window, click Uninstall Latest Quality Update option.

Uninstall updates

3.Next click on the Uninstall Quality Update button.

Uninstall Quality Update

4.After the uninstall process is complete, click the Done button.

5.Then click Continue to launch Windows.

Continue to launch Windows

Reset the PC

If the above methods did not work, the only solution you have got is reset the PC.

1.In repair mode, go to Troubleshoot > Reset this PC.

Reset this PC

2.Follow the instructions on the screen to continue.

This method would fix windows 11 stuck on preparing windows loop.

Fix windows 11 stuck on preparing windows loop

Using above troubleshooting methods you can fix windows 11 stuck on preparing windows loop permanently. Next thing you should do is installing any pending driver and system updates. This will help you avoid such problems in the future.

Frequently Asked Questions

Why is preparing windows taking so long?

The time for preparing windows can take some time. With a normal circumstances ii take 20 – 30 minutes of time. It is not take more time than it. But if you haven’t installed windows update recently or if you gonna make update after long time it might take some time to install and update. In such a situation the time limit can exceed the time limit before mentioned.

How do I know my if my windows update is stuck?

You can find it within few steps. First, select performance tab and then check the activity of the CPU, Disk, Memory, and internet connection. If you see a lot of activity which means the update process is not stuck. But if there is no activity, which means the update process is stuck.

What happens if I turn off my computer during windows update?

If you shut down the PC when it’s downloading new windows update, All your new data will be backed up or your downloaded process can continue after restarting the PC. But sometimes update will be restarted and the data can get corrupted also.

Read more: Fix the Speech Diagnostic Calibrate Error in Windows 11

Fix Microphone Problems in Windows 10

Leave a Reply

Your email address will not be published. Required fields are marked *